Radiant Heat Warmer 5000
Mobile new born resuscitation table – Fixed heightSkin, Manual and Pre-Warm control modes Microprocessor based controller with highly accurate Thermistor sensors (No Calibration required) LCD for alarm messages APGAR (Up) and Down Timer Ceramic heater with reflector and safety grill Patient examination lamp for extra illumination during procedure Stainless Steel Baby bed with Baby Mattress (density approx. 21-25 kg/m³) with waterproof.
Key Features
- Continuous variable head up/down facility.
- Polycarbonate side panels collapsible/lockable.
- X-ray cassette holder tray underneath baby bed.
- Facility to attach syringe/infusion pump, shelf to place monitor.
- SS multi hook IV stand
- Facility to incorporate Under Surface Phototherapy
- Mounted on 4 swivel castors (100 mm)
Radiant Heat Warmer 2100
Powerful Processor Advance, Accurate & high speed micro-controller based system No Calibration Thermistor sensor & Preloaded software eliminates recalibration of temperature Overheating Safety Heater power 25% If 100% heater power for 15 minutes (All modes) User friendly Display of Baby temp (ºC & ºF), Air & Set temp., % Heater power Alarm message on LCD & Timers Keypad lock facility
Key Features
- Baby Tray Continuous adjustable bed tilt, .
- Mattress with washable cover, X-ray cassette holder .
- Unbreakable Polycarbonate side panels collapsible/lockable
- Non Corrosive Stainless steel baby tray.
- Aluminium coated lower shelves, Stainless steel IV/Infusion rod
Radiant Heat Warmer 1100
Powerful Processor Advance, Accurate & high speed micro-controller based system No Calibration Thermistor sensor & Preloaded software eliminates recalibration of temperature Overheating Safety Heater power 25% If 100% heater power for 15 minutes (All modes) User friendly Display of Baby temp (ºC & ºF), Air & Set temp., % Heater power Alarm message on LCD & Timers Keypad lock facility .
Key Features
- Baby Tray Continuous adjustable bed tilt.
- Mattress with washable cover, X-ray cassette holder
- Unbreakable Polycarbonate side panels collapsible/lockable
Radiant Heat Warmer 4000
Powerful Processor Advance, Accurate, Reliable, Durable and High speed microprocessor controlled environment for the infant Enclosure Smooth, Crevice Free designed surface with Fire retardant composite enclosure for better safety with Height adjustment Facility Control Modes Skin Mode, Air Mode, Manual Mode & Pre-Warm Mode.
Key Features
- Safety Alarms Clear Audio and Visual alarm with alarm messages on LCD.
- Alarms include overheating, sensor failure, heater failure & power failure
- Operating Voltage: 220-240 VAC, 50 Hz
- Calibration Free Device : Thermistor based sensor and pre-loaded Software.
- that eliminates re-calibration of temperature controller
Transport Baby Incubator
Microprocessor based temperature controller with Skin Servo modes, Air and Manual LED Display of Skin Temp., Air Temp. (Resolution 0.1°C). Barcode display for Heater Power % LCD to display modes of Operation, Alarm messages and Timer. Modes of Operation: Skin Servo, Air and Manual Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C Air mode: Temperature range: Room temp. to 39°C
Key Features
- Manual mode: Adjustable Heater Power 0 to 100%, Time duration 20mins.
- Safety cutoff at 38°C for skin, 39°C for air with audio and visual alarms.
- Operating Voltage: 220-240 VAC, 50Hz, Reliable invertor system (External)Power: 650W (Max.)
- Alarm Audio alarm with 10 minute mute facility & Visual alarms with message on LCD.
- Power Fail Alarm: Audio with LED indicator
Baby Incubator
Performance/Electrical Specifications: Microprocessor based temperature controller with Skin Servo modes, Air and Manual LED Display of Skin Temp.,Air Temp. (Resolution 0.1°C) Barcode display for Heater Power % LCD to display modes of Operation, Alarm messages and Timer Modes of Operation Skin Servo, Air and Manual Skin mode Temperature range: 34 to 38°C , Resolution : 0.1°C Safety cutoff at 38°C for skin.
Key Features
- 39°C for air with audio and visual alarms Operating Voltage 220-240 VAC, 50Hz.
- Alarm Audio alarm with 10 minute mute facility & Visual alarms with message on LCD
- Power Fail Alarm: Audio with LED indicator.
- Air mode Temperature range: Room temp. to 39°C.
- Manual mode: Adjustable Heater Power 0 to 100%, Time duration: 20mins.
LED Phototherapy Stand 4001
Body Structure Heavy duty mobile stand phototherapy unit mounted on 4 castor wheel (with brakes 2 nos ) along with infant care trolley mounted on 4 castor wheel with brakes 2 nos) and under surface phototherapy unit Light source Therapeutic high wattage blue LEDs, 16 nos for over surface and 8 nos for under surface having wavelength of 455 nm to 465 nm and for observation high wattage white LEDs, 04 nos. LED lamps rated to last up to 50,000 hours at high power .
Key Features
- Height adjustment facility Over surface phototherapy unit have light source height adjustment .
- Range between 0.95 m to 1.5 m from the floor .
- Blue LEDs of Over surface phototherapy stand have a light dimming facility .
- Over surface phototherapy stand have source swivelling facility, continuous upto 90 on both side .
- Effective surface area of the phototherapy unit is 40 cm x 30 cm, having a uniformity ratio of 40% at a distance of 35cm to 45 cm from light source. High irradiance measures upto 67.5 .
- Digital timer pW/cm2/nm for over surface and 37.0 pW/cm2/nm Dual digital cumulative timer in hours for lamp timer and patient timer .
LED Phototherapy Stand 6001
Body Structure Heavy duty mobile stand phototherapy unit mounted on 4 castor wheel (with brake 2 nos ) Light source Therapeutic high wattage blue LEDs, 12 nos having wavelength of 455 nm to 465 nm. LED lamps rated to last up to 50,000 hours at high power Height adjustment facility Over surface phototherapy unit have light source height adjustment range between 0.95 m to 1.5 m from the floor. .
Key Features
- Over surface phototherapy unit have source swivelling facility, continuous upto 90*on both side.
- Effective surface area of the phototherapy unit is 40 cm x 30 cm, having a uniformity ratio of 40% at a distance of 35 cm to 45 cm from light source .
- Irradiance measures upto 67.5 uW/cm2/nm .
- Dual digital cumulative timer in hours for lamp timer and patient timer .
Under Surface Phototherapy 4105
A Body Structure Detachable light source made up of poly-carbonate material Light source Therapeutic high wattage blue LEDs, 08 nos having wavelength of 455 nm to 465 nm. LED lamps rated to last up to 50,000 hours at high power Effective surface area.
Key Features
- Effective surface area of the phototherapy unit is 40 cm x 30 cm, having a uniformity .
- Ratio of 40% at a distance of 15 cm. High irradiance measures upto 37 pW/cm2/nm.
- Digital timer Dual digital cumulative timer in hours for lamp timer and patient timer.
- Overheat protection power cutoff for temperature at 90°C
Double Surface Led Phototherapy
Body Structure Heavy duty mobile stand phototherapy unit mounted on 4 castor wheel (with brakes 2 nos ) along with infant care trolley mounted on 4 castor wheel (with brakes 2 nos) and under surface phototherapy unit Light source Therapeutic high wattage blue LEDs, 16 nos for over surface and 8 nos for under surface having wavelength of 455 nm to 465 nm and for observation high wattage white LEDs, 04 nos. LED lamps rated to last up to 50,000 hours at high power.
Key Features
- Height adjustment facility Over surface phototherapy unit have light source height adjustment range between 0.95 m to 1.5 m from the floor .
- Dimming facility Blue LEDs of Over surface phototherapy stand have a light dimming facility .
- Source swiveling Over surface phototherapy stand have source swivelling facility, continuous upto 90 on both side. .
Bubble CPAP
It is an easy and reliable solution to provide adjustable CPAP level (0.5 to 9.5 mbar). Miniflow Starter Kit 10 Patient Interface Miniflow® Passive nCPAP Interface (Patient Interface). Nasal Masks Our nasal masks are available in five sizes and feature a high degree of wear comfort. .
Key Features
- Binasale Prongs Our prongs are available in seven different sizes and are made of high-quality silicone.
- Bonnets for Single UseA perfect fixation of prongs and masks. There are different sizes available.
- The correct size is measured by our measuring tape. Material: 95% Polyamid, 5% Elastan.
- Fixation Pillow Minifoam Material Polyurethan-ether.
- The measuring tape assists in the size selection of prongs, masks and bonnets.
HFNC
High Performance Designed to exceed the ISO standard for respiratory humidification Precise, convenient O2 delivery from 21 to 100% Easy to set up and use Simple controls Integrated O2, mixing Inbuilt O2, sensor.
Key Features
- No probes or external air supply required.
- Variety of Opti flow patient interfaces for upper and bypassed airways.
- Wide flow range: 2-60 L/min.
Infant Care Trolley
Digital Display of Factor, Machine ON/OFF Switch, kV and mAs Increase / Decrease Switch Ready X-Ray On Indication, Bucky selection, Focal spot selections Dual Action Hand Switch with Ready and Expose Switch Self Diagnostic Program with Display of various Error Automatic Voltage Compensation Microprocessor Control Tube Overload Protection.
Key Features
- APR Based Control.
- Soft Touch keyboard with Automatic selection of kVp, and mAs for each Body part.
- Illuminated LCD Display for Digital display of applied Factor for each Body part.
- Each Body part is programmable for new selection of kVp, and mAs through Soft Touch Keyboard.
- Actual Input Voltage Display for accurate Voltage.
Neonatal Ventilator
Supports the earliest possible spontaneous breathing by the patient Shortens the ventilation time in various patient groups.
High-performance noninvasive ventilation (NIV)Integrated high-performance turbine supplies a peak flow rate of up to 260 l/min Optimal performance is ensured even with large leaks.
Key Features
- Integrated high flow oxygen therapy Reduces the need for intubation Lowers the risk of reintubation within 72 hours.
- Speaking valve Gives your patients a voice Can be used in pressure-controlled modes (PCV+, PSIMV+, SPONT).
Syringe Pump
Digital Display of Factor, Machine ON/OFF Switch, kV and mAs Increase / Decrease Switch Ready X-Ray On Indication, Bucky selection, Focal spot selections Dual Action Hand Switch with Ready and Expose Switch Self Diagnostic Program with Display of various Error Automatic Voltage Compensation Microprocessor Control Tube Overload Protection.
Key Features
- APR Based Control.
- Soft Touch keyboard with Automatic selection of kVp, and mAs for each Body part.
- Illuminated LCD Display for Digital display of applied Factor for each Body part.
- Each Body part is programmable for new selection of kVp, and mAs through Soft Touch Keyboard.
- Actual Input Voltage Display for accurate Voltage.
Volumetric Syringe Pump
Digital Display of Factor, Machine ON/OFF Switch, kV and mAs Increase / Decrease Switch Ready X-Ray On Indication, Bucky selection, Focal spot selections Dual Action Hand Switch with Ready and Expose Switch Self Diagnostic Program with Display of various Error Automatic Voltage Compensation Microprocessor Control Tube Overload Protection.
Key Features
- APR Based Control.
- Soft Touch keyboard with Automatic selection of kVp, and mAs for each Body part.
- Illuminated LCD Display for Digital display of applied Factor for each Body part.
- Each Body part is programmable for new selection of kVp, and mAs through Soft Touch Keyboard.
- Actual Input Voltage Display for accurate Voltage.
Jaundice Meter
Advanced op_cs and so ware simple to use instant test results Storage and memory function No pain for infant Specification:- Display LCD Battery backup 1 horus (Recharable) .
Key Features
- Power AA 1.5Vx2 alkaline ba_ery.
- Measurement range 0.0mg/d L ~ 32.0 mg/d L.
- High resolutionThe Reguis 1 supports pixel sizes of 87.5um and 175um for all assette sizes.
- Measurement accuracy Range is +1.5 mg/d L (25.5 pmol/L) Charging preparation _me 12 seconds .
- Record function record 21 previous measurement values and review recorded data repeatability 10% .
Pulse Oximeter
A pulse oximeter is a vital medical device used to measure blood oxygen saturation levels and pulse rate non-invasively. It provides quick and accurate results, making it essential for monitoring respiratory health. Compact and user-friendly, it is widely used in hospitals, clinics, and at home. With advanced technology,
Key Features
- VPM 10 2.8 " color LCD display .
- Module options: METSL/ Digital SpO2 technology .
- Suitable for adult, pediatric and neonate mode .
- Advanced anti-motion algorithm preventing interference and false alarms .
Neonatal Resuscitation Unit
Mobile new born resuscitation table - Fixed height Skin, Air, Manual and Pre-Warm control modes Microprocessor based controller with highly accurate Thermistor sensors (No Calibration required).
Key Features
- LCD for alarm messages .
- APGAR (Up) and Down Timer .
- Ceramic heater with reflector and safety grill .
- Patient examination lamp for extra illumination during procedure .
Resuscitation Kit & Accessories
Infant resuscitator 250ml Silicone face mask size 00 and 01 Silicone airways size 000, 00 and 0 Foot suction resuscitation kit is an essential medical tool designed for emergency situations to restore breathing and circulation. It typically includes a manual resuscitator, oxygen mask, airways, and related accessories for effective patient care. These kits are critical in hospitals, ambulances, and first-aid scenarios, ensuring rapid response to respiratory or cardiac emergencies.
Key Features
- Laryngoscope with stainless steel straight blade size 0 & 01 and penlight handle .
- Shoulder carrying kit bag .
- high-quality resuscitation kits and accessories to support life-saving interventions. .
Infant TP Series
T-Piece Resuscitator is manually operated, gas powered resuscitator designed to provide breaths at a set flow which ensures adequate pressure delivery and oxygenation to the infants. First Breathe® is a T-piece device with controlled PIP, consistent PEEP, thus providing maximum oxygenation to the baby's lungs.
Key Features
- T-piece Resuscitator is a device used to resuscitate (bring back to consciousness) a patient .
- One tube is connected from gas line to the gas .
- inlet port and another tube comes from gas outlet port to the T-piece. .
- T-piece is connected to the neonatal resuscitation mask. .
